Master Your Proffie Neopixel Lightsaber

And unlock all its potential

Lightsaber Instructions for our Proffie 2.2 models.

  1. Powering on and off (make sure the saber is charged first)
  • To awaken from deep sleep mode, hold the button for 1 second.
  • To turn it off, press and hold the button for 3 seconds.
  • To put the saber in deep sleep mode, press and hold the button for 5 seconds.
  • To turn the saber on, click the button once.
  • To ignite the saber Muted press the button twice and hold the button until the saber ignites.
  1. Background music (saber should be in stand-by mode)
  • Background music: Click the button 2 times to turn on the background sound, switch the background sound, and turn off the background sound..
  1. Lightsaber effects (saber must be turned on)
  • Blaster sound: Tap the button.
  • Changing colors: Point the saber down at the floor and while pressing the button twist the saber rapidly clockwise. The saber will enter the color changing mode. Spin the saber until you find the preferred color and then press the button to set the color.
  • Saber Lock-up: Press the button and move the saber to activate saber lock-up
  • Flash-on-clash: The saber will automatically flash white and emit a sound when it hits another surface.
  • Melt effect: Press and hold the button for 2 seconds and hit the tip of the blade or abruptly move the blade forward.
  1. Sound effects (saber should be in stand-by mode)
  • Changing sound fonts: Press the button for 2 seconds to change the sound font and lightsaber effects. Repeat to cycle through the sound fonts.
  • Adjusting volume: Press the button for one 1 second to adjust the volume.
  • To check the battery power press the button 3 times when in stand-by mode.
  1. Breathing light when charging
  • The breathing light is not supported on our Proffie models.

     

     

    Recently viewed