Proffie Neopixel Lightsaber Instructions
Lightsaber Instructions for our Proffie 2.2 models.
- Powering on and off (make sure the saber is charged first)
- To awaken from deep sleep mode, hold the button for 1 second.
- To turn it off, press and hold the button for 3 seconds.
- To put the saber in deep sleep mode, press and hold the button for 5 seconds.
- To turn the saber on, click the button once.
- To ignite the saber Muted press the button twice and hold the button until the saber ignites.
- Background music (saber should be in stand-by mode)
- Background music: Click the button 2 times to turn on the background sound, switch the background sound, and turn off the background sound..
- Lightsaber effects (saber must be turned on)
- Blaster sound: Tap the button.
- Saber Lock-up: Press the button and move the saber to activate saber lock-up
- Flash-on-clash: The saber will automatically flash white and emit a sound when it hits another surface.
- Melt effect: Press and hold the button for 2 seconds and hit the tip of the blade or abruptly move the blade forward.
- Sound effects (saber should be in stand-by mode)
- Changing sound fonts: Press the button for 2 seconds to change the sound font and lightsaber effects. Repeat to cycle through the sound fonts.
- Adjusting volume: Press the button for one 1 second to adjust the volume.
- To check the battery power press the button 3 times when in stand-by mode.
- Breathing light when charging
- The breathing light is not supported on our Proffie models.
Neopixel Lightsaber Ignition

Proffie Soundfont Selection
