Charging Darth Maul
The charging port on the Darth Maul is concealed inside and requires a little bit of easy dis-assembly. Do not worry, even a young Padawan can do it.
- Disconnect the sabers from each other and also unscrew the middle connector.
- Unscrew the internal cap (the one with a hexagon)
- Unscrew buttons and knobs from the hilt
- Unscrew the small screws that were under the red knobs
- Pull the core out to expose the micro-USB charging port
- Charge for 4 hours
Refer to the video and pictures below for reference.
![](http://saberspro.com/cdn/shop/files/Darth_Maul_next_to_coupler_221b4c73-b6e2-44a1-afdc-3c380cf2507c_{width}x.jpg?v=1646617728)
Step 1
Disconnect the hilts and detach the middle coupler
Step 2
Unscrew the bottom cap. You can use your fingers or tweezers.
![](http://saberspro.com/cdn/shop/files/Darth_Maul_without_the_hexagon_cap_{width}x.jpg?v=1646617921)
![](http://saberspro.com/cdn/shop/files/Darth_Maul_without_button_and_knobs_{width}x.jpg?v=1646618132)
Step 3
Unscrew the buttons and knobs from the hilt. Do not forget to unscrew the small screws under the red knobs. Pull out the core and plug in a micro-USB charging cable.