Master Your Xenopixel Lightsaber

And unlock all its potential

Lightsaber Instructions for our SN Pixel V3 models.

One Button Saber Instructions: 

1. Powering on and off (make sure the saber is charged first):
  • To ignite the saber, hold the button and then click it or twist the saber hilt.
  • To retract the saber, press and hold the button for 4 seconds or twist the saber hilt.
2. Button Instructions when the saber is Not Ignited
  • Change blade color: press the button and twist the saber hilt to change the soundfont
  • Adjust volume: Press and hold the button for 1 second. 
  • Change Ignition Effect: Press and hold the button for 2 seconds.
  • Change Blade Effects: Press and hold the button for 3 seconds.
  • Change Soundfonts: Press and hold the button for 4 seconds.
  • Power saving mode: The saber enters the power saving mode after 20 minutes of no operation.
  • The saber beeps when batteries are installed correctly.
3. Button Instructions when the Saber Is Ignited
  • Blaster Effect: Click the button once.
  • Saber Lock-up: Press and hold the button for 1 second then release. 
  • Changing Blade Color: Press and hold the button for 2 seconds then release.
  • Flash On Clash: Press and hold the button for 3 seconds then release to turn the effect on or off. 
  • To retract the saber: Press and hold the button for 4 seconds or twist the saber hilt.
4. Motion Based Effects when the saber is Not Ignited
  • Change Soundfonts: Point the blade up, press and hold the button and then twist the saber.
  • Change Background Music: Point the blade down, press and hold the button, then twist the saber.
5. Motion Based Effects when the Saber Is Ignited
  • Change Blade Color: Point the saber down, press and hold the button, then twist the saber.
  • Flash On Clash: The saber will flash and produce a sound when it hits a surface.
  • Drag Effect: Press and hold the button, then hit the saber.
  • Tip Melt Effect: Press and hold the button, then thrust the saber.
  • Force Effect: Point the saber up, press and hold the button then twist the saber.

Two Button Saber Instructions: 

1. Powering on and off (make sure the saber is charged first):

  • To ignite the saber, click the top button or twist the saber hilt.
  • To retract the saber, click the top button or twist the saber hilt.

2. Button Instructions when the saber is Not Ignited

  • Change The Soundfonts: Click the lower button once
  • Adjust The Volume: Click both buttons at the same time to enter the volume settings mode. Then Click the upper button to increase the volume or click the lower button to decrease the volume.
  • Change Ignition Effect: Press the upper button for 0.5 seconds.
  • Change Blade Effects: Press and the lower button for 0.5 seconds (the blade effect will be announced).
  • Power saving mode: The saber enters the power saving mode after 20 minutes of no operation.
  • The saber beeps when batteries are installed correctly.

3. Button Instructions when the Saber Is Ignited

  • Blaster Effect: Click the lower button.
  • Saber Lock-up Effect:  Press and the lower button for 0.5 seconds.
  • Flash On Clash Effect: Click both buttons at the same time to turn the effect on or off.

4. Motion Based Effects when the saber is Not Ignited

  • Switch Soundfonts: Point the saber up, press and hold the lower button, then twist the saber.
  • Change Background Music: Point the saber down, press and hold the lower button, then twist the saber.

5. Motion Based Effects when the Saber Is Ignited

  • Change Blade Color: Point the saber down, press and hold the lower button, then twist the saber.
  • Flash On Clash: The saber will flash and produce a sound when it hits a surface.
  • Drag Effect: Press and hold the upper button, then hit the saber.
  • Melt Effect: Press and hold the lower button then thrust the saber.
  • Force Effect: Point the saber up, press and hold the lower button, then twist the saber.

Please reach out to Support@saberspro.com if you have any questions.

Neopixel Ignition and Shutdown

Recently viewed